f you are like most everyone in our club, you would like to protect the front end of your rig. This Tech Tip provided by John Vegas show us how to add a RoverTym Engineering Front Bumper to your Disco.

Club Disclaimer:

We are not recommending you use these instructions to install this or any Front Bumper on your vehicle. My advice is to take your vehicle to an authorized dealer and have the front bumper installed by a professional.

The following is simply a documentary of how the front bumper was installed. If you decide to purchase and install a front bumper and end up butchering your car... it's your fault...
Take it to an authorized dealer!

(Click any image to enlarge)

Removing the stock front bumper is pretty straight forward.  Just take everything off.

Once you have it off, you should have a beach on your floor if you've done it right.

RTE does not sell a windshield bottle relocation kit, but Expedition Exchange apparently does. RTE suggestion is just to paint the thing black...so we'll see how that works out.

Using the same milk crate method perfected while doing the rear bumper, I got the front on.

When all is said and done, you should have a pile of debris like this left over.